Intelix DL-DA14 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačový hardware Intelix DL-DA14. Intelix DL-DA14 User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 1
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
11675 Ridgeline Dr
Colorado Springs, CO 80921
Phone: 719-260-0061
Toll-Free: 800-530-8998
Fax: 719-260-0075
DL-DA14 Installaon Guide
Instrucons:
1. Connect the source device to the HDMI input using an HDMI cable that is less than or equal to 5 meters in length. If the
source device that is further away, it is highly recommended to install a Digitalinx DL-HD70 or DL-HDE100.
2. Connect the display devices to HDMI outputs using HDMI cables that are less than or equal to 5 meters in length. For
display devices that are further away, it is highly recommended to install a Digitalinx DL-HD70 or DL-HDE100.
3. The DL-DA14 ships with the EDID switch on the rear of the distribuon amplier set to STD (1080p with stereo audio).
Seng the switch to DISP will use the EDID informaon from the display on output 1 to send to all connected displays.
4. The DL-DA14 ships with the CEC switch on the rear of the distribuon amplier set to OFF. When the switch is set to
ON, the distribuon amplier will send CEC commands to the display to switch to the connected HDMI input.
5. Plug the power supply into the power input port on the rear of the distribuon amplier. Twist the collar of the power
plug in a clockwise direcon to secure the connecon.
6. The SYNC LED will light when a source is detected on the input. The output LEDs will light when a display is detected
to the corresponding output.
DL-DA14 Installaon Guide
HDMI Distribuon Amplier
Rev 140624
The Digitalinx DL-DA14 is a one input to four output HDMI distribuon amplier (DA). The DL-DA14 supports supports 3D
and 4K video resoluons as well as mulchannel audio formats.
The EDID sengs for the DL-DA14, either 1080p with stereo audio or the EDID of the display on Output 1, are congured
by a switch on the rear of the DA. The DL-DA14 features diagnosc LEDs on the front of the product indicang the state of
the connecons into and out of the unit. The CEC switch on the rear of the DA will send a switch to input 1 command to
displays that support CEC if the swich is acvated.
Zobrazit stránku 0
1

Shrnutí obsahu

Strany 1 - DL-DA14 Installaon Guide

11675 Ridgeline DrColorado Springs, CO 80921Phone: 719-260-0061Toll-Free: 800-530-8998Fax: 719-260-0075DL-DA14 Installaon GuideInstrucons:1. Connec

Komentáře k této Příručce

Žádné komentáře